Product Description
Dx8000 full-automatic dielectric loss tester with different
frequency is a high-precision instrument for testing dielectric
loss tangent and capacitance of various high-voltage power
equipment in power plants, substations and other fields or
laboratories. The instrument is an integrated structure with
built-in dielectric loss test bridge, variable frequency voltage
regulating power supply, step-up transformer and SF6 high stability
standard capacitor. The test high-voltage source is generated by
the inverter inside the instrument and is used for the test object
after boosting the voltage of the transformer. The frequency can be
changed into 50Hz, 47.5hz 52.5hz, 45Hz 55Hz, 60Hz, 57.5hz 62.5hz,
55Hz 65Hz. The digital notch technology is adopted to avoid the
interference of power frequency electric field to the test, which
fundamentally solves the problem of accurate measurement under the
interference of strong electric field. At the same time, it is
suitable for the situation that the generator is used for power
supply detection after power failure. The instrument is equipped
with insulating oil cup and temperature control device to test the
dielectric loss of insulating oil.
Feature/Function
Large LCD display
The operation is simple, the instrument is equipped with high-end
full touch LCD, super large full touch operation interface, each
process is very
clear, the operator can use without additional professional
training. At present, it is a very ideal intelligent dielectric
loss measuring equipment.
Mass storage data
The instrument is equipped with a calendar chip and a large
capacity memory, which can save 200 groups of data, save the test
results in chronological order, view the history at any time, and
print out.
Scientific and advanced data management
The instrument data can be exported through U disk, and can be
viewed and managed on any PC through our company's special
software.
Various test modes
The instrument can be tested by internal high voltage, external
high voltage, internal standard, external standard, positive
connection method, reverse connection method, self excitation
method, etc. under external standard external high voltage, it can
be used for high voltage (more than 10kV) dielectric loss.
