1. The three-phase precision inverter power supply is adopted in
the instrument, instead of single-phase mains power supply, which
can eliminate the harmonic influence of mains voltage and make the
measurement more accurate. There is no effect when the working
power is generator.
2. The three-phase output voltage is adopted to improve the test
speed. The Angle between phases can be measured and the transformer
connection group 0-11 can be automatically identified
3. It is applicable to a wide range of transformers, especially for
the measurement of z-type transformer, rectifying transformer,
grounding transformer, furnace transformer, phase change
transformer and balance transformer, with the most comprehensive
measurement parameters.
4. The use of homemade precision three-phase inverter power, with
high and low voltage reverse connection protection, transformer
between turns short circuit protection, tap switch is not in place,
output short circuit protection, increase the stability of the
instrument.
5. After the input of rated parameters, transformer ratio, error
value and tap switch tap position can be automatically measured,
especially for the tap switch with asymmetric tap, the exact
position of the tap switch can also be accurately measured, and the
tap switch with up to 99 tap points can be measured.
6. 7-inch HD color touch screen liquid crystal, modular display,
each operation step has prompt, no manual, just look at the liquid
crystal prompt can complete the operation of the instrument.
7. The instrument has both print output and U disk interface, and
also can be equipped with RS232 interface, which is convenient for
paperless office.
8. Adopt cold and temperature resistant, sealed and waterproof,
anti-fall and shockproof multi-functional engineering plastic box,
which is convenient for field test.
